Saito Engine FA-62B 제조 회사 Saito Engine 상품코드 SAEG006200 소비자 가격 420,000원 회원 판매 가격 318,000원 현재 재고수량(구매가능 수량) 5 개 수량(구매수량) 개

기본 설명 Saito Engine FA-62B 25년이상 4싸이클 엔진만 고집해온 SAITO 엔진은 높은 가공정밀도를 요구하고 열발산효과가 높은 일체형 실린더를 사용하고 있으며 최고 품질의 크롬도금과, 고실리콘 합금의 피스톤과 콘로드등으로 그 품질을 사용자가 인정하고 있습니다. 일체형 실린더에서 오는 탁월한 냉각 성능과 경의로운 무게감량, 쉬운 세팅등으로 수많은 사용자에게 사랑을 받아온 SAITO 엔진이 이제 RC Hobby와 함께 합니다. Saito FA-62/FA-62GK Specifications Type: 4 Stroke Displacement: .62 cu in. (10.21cc) Bore: 26.2 mm Stroke: 19.0 mm Cylinders: Single Total Weight: 464 grams 16.4 oz Engine (Only) Weight: 418 grams 14.7 oz Muffler Weight: 46 grams 1.7 oz Crankshaft Threads: M7 x 1 mm Prop Range: 11x7 thru 13x7 Fuel: 10% - 30% nitro - Synthetic Oil Mounting Dimensions: 137mm x 53mm x 102mm Muffler Type: Cast Cylinder Type: AAC Carb Type: Barrel - Two needle Crank Type: Dual Ball Bearing 상품 평가 다른 고객님들을 위하여 Saito Engine FA-62B의 평가를 해주시겠습니까?

You will note a letter (A, B, C, etc.) stamped on the top of the right motor mounting lug. This letter identifies the production version of your engine. Should you ever need to order a part or have a question pertaining to your engine, specify this letter along with the engine type. This will allow ease in identifying your engine. Saito Single Cylinder Prop Chart NOTE: All recommendations are based on engines using APC Prop, Wildcat 15% Nitro/18% ALL Synthetic Oil Fuel, and OS Type F Glow Plug.
Engine	HP	Sport / Aerobatic	Scale	Pattern
FA-30S (H)/30SGK 2,200?2,000 RPMs	.60	10x6	9x5, 10x6	9x5, 10x6
FA-50/50GK 2000-12,000 RPMs	.85	11x7, 11x8, 12x6	12x5, 12x6	11x7, 11x8, 12x6
FA-56/56GK 2000-12,000 RPMs	.93	11x8, 12x6, 12x7	12x6, 12x7	11x8, 12x6, 12x8
FA-65/65GK 2000-11,500 RPMs	.95	12x6, 12x8, 13x6, 13x8	12x8, 13x8, 14x5, 14x6	11x9, 12x8, 13x6
FA-72/72GK 2000-11,500 RPMs	1.2	12x8, 13x7, 13x8, 14x6	12x8, 13x7, 13x8, 14x6	12x8, 13x7, 13x8, 14x6
FA-80/80GK 2000-11,500 RPMs	1.3	12x8, 13x6, 13x7, 13x8, 14x6	13x6, 13x7, 13x8, 14x6, 15x4	11x9, 11x10, 12x8, 12x9
FA-91S/91SGK 2000-11,000 RPMs	1.7	12x10, 13x8, 13x10, 14x6, 14x7, 14x8	12x10, 13x8, 14x6, 14x7, 14x8, 15x6	11x10, 11x11, 12x9, 12x10N, 13x9
FA-100/FA-100GK 2000-11,000 RPMs	1.8	14x8, 14x10, 15x6	12x11, 13x9, 14x8, 14x10, 15x6	12x11, 13x9, 14x8, 14x10, 15x6
FA-120S/120SGK 2000-10,500 RPMs	2.2	14x10, 15x8, 15x10, 16x6, 16x8	15x8, 16x6, 16x8, 18x6	13.5x13.5, 14x10N, 14x12
FA-150/150GK 2000-10,000 RPMs	2.5	15x8, 15x10, 16x8, 17x8, 17x8N, 18x6, 18x8	16x8, 17x8, 18x6, 18x8	14x10N, 14x12, 15x10, 15x11
FA-180/180GK 2000-10,000 RPMs	2.8	15x10, 16x8, 17x8, 17x8N, 18x6, 18x8	16x8, 16x10, 17x8, 17x8N, 18x6, 18x8	14x10N, 14x14, 15x10, 15x12, 16x10, 17x8
NOTE: Observe operating RPM ranges as excessive RPM can result in damage to the engine. It is recommended that you keep ALL of the above engines below 10,000 RPMs.